FAL FIREFIGHTER & RESCUE BOOTS
FAL provide a wide range of high-quality boots for Firefighters and rescue personnel, including the world's first 'material firefighting boot'. Their products are designed to be reliable and comfortable in all situations, thanks to their lightweight, breathable construction and their flexible, high shock-absorbing soles.
FAL Firefighter and Emergency Services Boots
FAL provide high-quality boots for Firefighters and rescue personnel. Their products are designed to be reliable and comfortable in all situations, thanks to their lightweight, breathable construction and their flexible, high shock-absorbing soles. FAL are also the manufacturers of the world's first material firefighting boot - the Volcano.
Safety boot for multipurpose fire fighting use including Forest, Structural and urban. Approved to EN 15090:2012
Upper: Full black grain leather fire and water resistant, breathable and great abrasion resistance.
Inner lining: Gore – Tex ® lining. Four layer membrane, waterproof and breathable. High abrasion resistance. Blood protection option: Crosstech ® (by Gore-Tex®)
Inner Sole: 2 layers (polyester and open-cell foam). Anatomically preformed, antibacterial (active carbon), great absorption of energy and recovery.
Insole: HTP (High Tenacity Polyester) penetration resistant insole. Similar to Kevlar®
Sole: antistatic, fireproof Rubber nitrile / polyurethane, with double colour external rubber to improve safety visibility and extremely slip resistant, flexible, comfortable and light.
Toe cap: composite Vincap ® toe cap with external rubber protection.(Lighter, no deformation, temperature isolated)
Threads: made of Kevlar, double; water & fire proof
Reflective parts: Back and side fire resistant 3M® strip.
Closing system: BOA ® system .Water, ice and mud resistant knob. Flame resistant according to EN 15090: 2012.
- Approved to EN 15090:2012
- Sizes 36 to 50 (EU)
- Height - 24-26 cm Weight - 2.30 Kg
- Ankle protection reflective strips and double stitching
- 2 wider pull straps and breathable Upper
- Back flexion and kevlar stitching
- New improved rubber external protection
- Shielded BOA closing system
- Waterproof Bootie Gore-Tex lining
- Rubber / polyurethane sole is slip resistant, antistatic, oil resistant, light and flexible
Safety boot for firefighters. The 'whole' boot is washable. Approved to EN 15090:2012
Upper: Fire and water resistant PBI® fabric and microfiber.
Inner lining: Crosstech® by Gore Tex® Membrane. Waterproof and breathable. Blood, body fluids and common chemicals resistant.
Inner sole: 2 layers (PES y open-cell foam). Anatomically preformed, antibacterial (activated carbon). High energy absorption and recovery.
Insole: HTP (High Tenacity Polyester) penetration resistant insole. Similar to Kevlar®.
Sole: antistatic, fireproof and heat resistant, with anti-slippery design. Fuel oil and slip resistant. Two coloured in order to increase daily visibility.
Toe cap: COMPOSITE VINCAP® covered by external rubber protection.
Threads: Double seam made of Kevlar that is water and fire resistant.
Reflective parts: Fire resistant 3M® reflector, high visibility.
Closing system: BOA® system. Water, ice and mud resistant knob. Flame resistant according EN 15090:2012. High tear strength lace/cable (>700 N) - Replaceable.
- Approved to EN 15090:2012
- Sizes 35 to 50 (EU)
- Height - 293 mm Weight - 900 g/boot
- PBI fabric is fire and water resistant
- Bigger pull straps are comfortable and with a breathable tongue
- Ankle protection fire resistant reflective strips and double seam
- Rubber external toecap protection
- BOA closing system is protected
- Rubber / polyurethane sole is slip resistant, antistatic, oil resistant, light and flexible
- High tenacity polyester Insole is similar to Kevlar
High safety boot for fire fighting use. Approved to EN15090:2012
Upper: Full black grain leather fire and water resistant breathable and great abrasion resistance.
Inner lining: Gore – Tex ® lining. Four layer membrane, waterproof and breathable. High abrasion resistance.
Inner Sole: 2 layers (polyester and open-cell foam). Anatomically preformed, antibacterial (active carbon), great absorption of energy and recovery.
Insole: HTP (High Tenacity Polyester) penetration resistant insole. Similar to Kevlar ®
Sole: Antistatic, fireproof Rubber nitrile / polyurethane, with anti- slippery relieve. Fuel oil resistant.
Toe cap: Composite Vincap ® toe cap with external rubber protection.(Lighter, no deformation, temperature isolated)
Threads: Made of Kevlar, double; water & fire proof.
Reflective parts: Wide and fire resistant 3M® reflector
- Approved to EN 15090:2012
- Sizes 38 to 50 (EU)
- Height - 34-37 cm Weight - 2.40 Kg
- Ankle protection 3M reflective strip
- Both sides have pull straps and breathable upper
- Front and back flexion
- New rubber toecap protection
- Full Gore-Tex Bootie
- Gore-Tex lining
- Rubber / polyurethane sole is slip resistant, antistatic, oil resistant, light and flexible
Safety boot for fire fighters. The 'whole' boot is washable. Approved to EN 15090:20102
Upper: Fire and water resistant PBI® fabric and microfiber.
Inner lining: Crosstech® by Gore Tex® Membrane. Waterproof and breathable. Blood, body fluids and common chemicals resistant.
Inner sole: 2 layers (PES and open-cell foam). Anatomically preformed, antibacterial (activated carbon). High energy absorption and recovery.
Protective Insole: HTP (High Tenacity Polyester) penetration resistant insole. Similar to Kevlar®.
Sole: Fireproof, heat resistant and antistatic sole made of nitrile rubber and polyurethane. Fuel oil and slip resistant. Two coloured in order to increase daily visibility.
Toe cap: COMPOSITE VINCAP® covered by external rubber protection.
Threads: Double seam made of Kevlar, water and fire resistant.
Reflective parts: Fire resistant 3M® reflector, high visibility.
- Approved to EN 15090:2012
- Sizes 35 to 50 (EU)
- Height 330mm Weight 900g/boot
- PBI fabric is fire and water resistant
- Bigger pull straps
- Ankle protection fire resistant reflective strips and double seam
- Rubber external toecap protection
- Front and back flexion
- Crosstech lining bootie format
- Rubber / polyurethane sole is slip resistant, antistatic, oil resistant, light and flexible
Uniformity shoe for professional use. Complies with EN ISO 20347:2012
Upper: Breathable + hydrofugated + abrasion resistant fabric.(PES+MICROFIBER)
Neck lining: high breathability and abrasion resistance fabric. Foamed. 100% PES
Inside lining: Gore-Tex, waterproof and breathable.
Inner insole: Anatomic foamed. Breathable and high water absorption/desorption.
Outsole: Rubber + EVA + TPU :Vibram Sole with Megagrip compound : new high performance rubber compound featuring unparalleled grip on wet and dry surfaces, rugged longevity and optimal ground adaptability
Closing system: Hydrofugated laces and reinforced non-metallic hooks + copper eyelets.
- Complies with EN ISO 20347:2012
- Sizes 36 to 48 (EU)
- Height 85mm Weight 800g/pair
- Breathing sole GTX surround
- Breathable collar lining
- Waterproof and breathable bootie membrane
- Vibram sole with MEGAGRIP compound
- Hydrofugated laces
- Non-metallic reinforced hooks for quick adjustment
- Removable and breathable insole
Uniformity boot for professional use. Complies with EN ISO 20347:2012
Upper: Breathable + hydrofugated + abrasion resistant fabric (PES+MICROFIBER)
Neck lining: high breathability and abrasion resistance fabric. Foamed. 100% PES
Inside lining: Gore-Tex, waterproof and breathable.
Inner insole: Anatomic foamed. Breathable and high water absorption/desorption.
Outsole: Rubber + EVA + TPU :Vibram Sole with Megagrip compound : new high performance rubber compound featuring unparalleled grip on wet and dry surfaces, rugged longevity and optimal ground adaptability
Closing system: Hydrofugated laces and reinforced non-metallic hooks.
- Complies with EN ISO 20347:2012
- Sizes 36 to 48 (EU)
- Height 205mm Weight 950 g/pair
- Breathing sole GTX surround
- Breathable collar lining
- Waterproof and breathable bootie membrane
- Vibram sole with MEGAGRIP compound
- Hydrofugated laces
- Non-metallic reinforced hooks for quick adjustment
- Removable and breathable insole
Uniformity boot for professional use. Complies with EN ISO 20347:2012
Upper: Three layers: hydrofugated polyester + polyurethane reinforcements + microfibers of polyamide
Neck lining: high breathability and abrasion resistance fabric. Foamed.
Inside lining: Gore-Tex membrane, waterproof and breathable. High abrasion resistance.
Inner insole: Anatomic preformed with antibacterial treatment. It allows 30º washing and it is abrasion resistant.
Outsole: Nitrile rubber Vibram Sole
Protective Insole: Non-metallic penetration resistant insole (High Tenacity Polyester).
Closing system: Hydrofugated laces and reinforced non-metallic hooks.
- Complies with EN ISO 20347:2012
- Sizes 36 to 47 (EU)
- Height 170mm Weight 1.19kg/pair
- Breathable upper and collar lining
- Waterproof and breathable lining membrane
- Vibram rubber sole
- Hydrofugated laces
- Non-metallic reinforced hhoks
- Flexible protective insole
- Removable and washable insole
